-
Van Fan
- Rep Power
- 1
Van started running rough? Misfiring on clyinder 3?
The old van had been running good for a while now. I went and filled it all the way up for the first time, then the next day the problems began. Not sure if its related but worth mentioning.
I drove the tank down a little and added some fresh gas to see if it was the problem, along with a little seafoam.
Trouble shooting so far has been-
Remove plug wires and see if it runs worse or the same. When I unplugged the plug wire on cyl 3 there was no change. It is still getting spark
I tapped on the side of the injector lightly to no change. It has started running a little better since its below half a tank but it is also becoming hard to start when its not warmed up.
Trouble codes- Have not checked them, CEL has been on since I bought it and was running decent before the last couple of days. Im sure one of them if from the sensor in the overflow tank not being hooked up.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules