-
Forum Newbie
- Rep Power
- 1
Rough Hot Idle - 1992 2TZ-FE - The Saga of Njordi
Hi Everyone, first task with my new Previa is to figure out why I am having bad idle once hot. I started by taking out the throttle body, EGR, and EGR modulator. Two culprits found.
PXL_20250112_231837200.jpg
All the vacuum hoses to the modulator were cracked and/or fully blocked. When taking apart the modulator the filter was completely solid and caked with carbon. I tried cleaning it out but I think it is a total loss. I just ordered a new one (Toyota part number 25870-76010).
The other problem I found was that the intake tube to the throttle body is falling apart and was fully cranked off at what I believe is the crank case vent that connects between the intake hose and the oil fill. It is cracked almost completely off where shown here:
PXL_20250112_215232899.jpg
So I ordered a new Dorman intake hose and hopefully that will be sorted (Toyota part number 17881-76050).
The throttle body was really quite clean and the IAC was also smooth and clean. I gave both a thorough cleaning anyway, but I very much doubt either of those are my problem.
Njordi goes into my mechanic on Wednesday for a block test.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules