Wiring harness refurbishing

[Gingervan19]

Hey whats up,

I decided to make a post on DIY refurbishing your wire Harness because we know that electronical is a big issue for us and there is no post on this subject.
(If one there on the forum, show me)

I plan to refurbishing my wiring harness on my van since the engine is rebuild. Do anybody can help me on how to do that on can show me a post already did on it (excepting the one of tim about the new harness for easy acess to the injector)

This is the tool that I found on internet that I think I will need to do the job.

- Wire striper :
https://www.amazon.ca/Irwin-Industrial-207830…/…/ref=sr_1_1…
- Shrink tubing:
https://www.amazon.ca/SummitLink%C2%AE-Assort…/…/ref=sr_1_4…
- Solder gun
https://www.amazon.ca/Portasol-010589330-Supe…/…/ref=sr_1_1…
- Helping hand
https://www.amazon.ca/Neiko-Hiltex-0190…/…/ref=sr_1_fkmr0_1…
-Dielectric lubricant
https://www.amazon.ca/3M-08946-Clear-Silicone…/…/ref=sr_1_1…
- Rosin paste
https://www.amazon.com/…/product/B008ZIV85A/ref=as_li_ss_tl…
- Electrical tape ( if you have better quality one, show us)
https://www.amazon.com/…/product/B016ZMXLEI/ref=as_li_ss_tl…
- 60/40 rosin core solder
https://www.amazon.com/…/product/B016ZMXLEI/ref=as_li_ss_tl…
- Wiring diagram book 1989 toyota van


Im looking for a High quality loom and shrink. Can anybody refer me to good one?
Do I miss someting about tools and stuff/parts to do the job?