I stumbled across our square 2 pin connectors. You know the ones that are brittle and always crumbling on us.
My goal is to find ones fresher than 30 years old that will not have me in the same situation.
Mitsubishi's seem to be a good source and are easy to pull as they are right on top. P&P wants about $4 ea.
Early 90 Mitsubishi Eclips, and Galant yeild these connectors on the injectors and VSVs.
It was tempting to take these VSVs
Also Late 90's changed to a connector with out the metal clip. (I personally have a thorn in my side about those.)
Squeeze to release. But it plugs in the same.
It is a large connector and may not work in certain areas on the van like the injectors. But I would we stoked to phase these in to my van.
I already put one on the temp sensor on the radiator cap.
Maybe someone can figure out year ranges for each of the generations galants and eclipses I pulled these from.
Some day I will get down to summit racing to try out these:
Standard Motor Pigtail Replacement Assemblies SK25
http://www.summitracing.com/nv/parts/smp-sk25
Holley Pro-Jection Service Parts 534-112
http://www.summitracing.com/nv/parts/hly-534-112
Caspers Electronics Fuel Injector Adapters 108012
http://www.summitracing.com/nv/parts/cei-108012
PICO Wiring 5625PT - Pico Wiring Connector Pigtails
http://www.summitracing.com/nv/parts/pco-5625pt
Note the notch in one side that keeps it from getting reversed.
If the Holly's work: They are the same price as used at the yard.
Maybe Tim has a source for them as well.
Happy Hunting!
Reply With Quote
