6 Attachment(s)
1987 4WD MT LE Part Out - Edmonton, AB, Canada
Parting out a 1987 LE 4WD MT. Located in Edmonton, Alberta, Canada. I can ship small items pretty easily but anything big, you'll have to do the leg work to ship or pick up - Postal code T6E 2A7. Much of this will be going on my 1987 4WD DLX Cargo, so the parts they replace will be likely available (including manual door internals and glass).Cool box/ice maker - $400USD for the unit including some ac lines that connect directly to it. Includes both ice trays and all trim/parts/screws and mounting brackets. Dirty but otherwise in good shape.
It has been gutted to the front wall. Don't see it listed? Get at me here or on Facebook (way more photos there - https://www.facebook.com/groups/52191869582/posts/10160501933069583/). Bought the van as a field find, I know nothing of it's history other than it has 250,000km on the odometer.
What's NOT available (for now):
- Front interior, including center console
- Gauge cluster with tach (non-LE one is up for grabs)
- Transfer case (for my Previa, unless the price is right)
- LE door cards, windows, power windows/locks
- Front dash harnesses and fuse box (my non-LE are up for grabs)
- Rear hatch and tail lights (non-LE are up for grabs).
- Front heater core
- Ignition & MFC
- Cruise control actuator and controller
- Maybe some other stuff I haven't thought of...
Everything else is available, including:
- LE wrap around air dam to the front wheels
- Rear heat/AC
- Front AC core
- Engine parts (note - rad is probably not salvageable)
- Engine (turns freely in gear when pulled)
- Manual transmission and linkages
- Rear glass
- Non-LE hatch
- Non-LE tail lights
- Front bumper assembly
- Body metal (note the rust in the photos - lower sections in bad shape).
- Rear seats including center row captains chairs
- 4 Suzuki Samurai wheels OR 3 Factory 5 bolt wheels
No holds, first with the cash takes the items.
Attachment 11787
Attachment 11788
Attachment 11789
Attachment 11790
Attachment 11791
Attachment 11792
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
I am interested in the blue exterior belt trim/moulding that sits above the the passeneger rear wheel well. Would you ship this?
Cheers,
Shane
(918) 779 -9605
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Hi, if you have it, I need the bracket that holds the transfer case control cable on the inside of the engine compartment, PN 90949-01226. See picture. Shipping to California.
Attachment 11723
Let me know! Thanks
Peter
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
ickybuck, nice parts van! I would buy and pay for shipping for the following parts: cruise control cable and mounting hardware, front emergency brake cable ( the one that attaches to the emergency brake lever).
sent a PM.
Ian
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Sure, PM me details and what it's worth to you. I'm in Canada, postal code T6E2A7...let me know how you'd want to ship it.
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Do you have a photo of where it's located on the van? This one is pretty rusty so I'll have to check the bracket to see if it's worth salvaging. Most nuts are rusted in place on the body.
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Quote:
Originally Posted by
Ian R.
ickybuck, nice parts van! I would buy and pay for shipping for the following parts: cruise control cable and mounting hardware, front emergency brake cable ( the one that attaches to the emergency brake lever).
sent a PM.
Ian
Thanks...haha. It's a little rough, but it's all I've got! I'm keeping the cruise to add it to my DX, but I think I have the brake cable. Send me a PM with what you think it's worth to you and how you'd want me to ship it. I'm in Canada, postal code T6E2A7.
2 Attachment(s)
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Quote:
Originally Posted by
ickybuck
Do you have a photo of where it's located on the van? This one is pretty rusty so I'll have to check the bracket to see if it's worth salvaging. Most nuts are rusted in place on the body.
It'll be on the inside of the engine compartment, behind this panel on the passenger side where the cables go in:
Attachment 11906
You'd need to take the passenger side cover off. This pic is the inside from below, marked in red showing where a bracket might be:
Attachment 11907
Basically I'll take any clip or bracket holding any of those control cables onto the body under there, I don't have anything. I'm not 100% sure how it's situated since I've never seen it installed.
thanks!
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Hello !
Not sure if you have this, I am interested in the spare tire hoist in the spare tire well. The metal hoist itself.
Cheers,
Camila 561-325-5049
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
hi there, im looking for the lower fan shroud for my 4wd, do you have one available?, thanks
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Quote:
Originally Posted by
ickybuck
Sure, PM me details and what it's worth to you. I'm in Canada, postal code T6E2A7...let me know how you'd want to ship it.
It has been a long time since I've used the site, not quite sure if this is the right way to contact the "poster " Do you still have this vehicle ???? ( ie various items are still available ? )
( Great field find, I wish I could find one closer )
Re: 1987 4WD MT LE Part Out - Edmonton, AB, Canada
Hey there,
I am interested in the Icemaker/cup holder combo if it is still available, and also any parts for the dash. Let me know if anyone is still active on this thread, otherwise I will assume it's all sold. Thanks! Sorry I am late to the party, just finding out about this thread now.